Aluratek AHDDUB100 manual

Aluratek AHDDUB100
  • Number of pages: 1
  • Filetype: PDF
  • 4
    SATA connector / dock slot
    HDD release button
    Power switch
    Power adapter port
    USB port

    Highlights and Application

    Aluratek Quick Start Guide, model AHDDUB100, 06/09

    Operating Instructions

    Getting Started:
    To make a duplicate copy of your hard drive, please remove the hard drive from
    your computer.
    Please make sure the target/blank drive has the same or higher capacity than
    your source hard drive. The duplication will not start if the target drive has
    smaller capacity than the source drive.
    It is recommended to use the same capacity blank/target hard drive as your
    source drive because you are making an exact ghost copy of your original hard
    drive. For example, if your original hard drive (source with data) is 80GB, the
    duplicated/ghost copy will also be 80GB even if you use a higher capacity drive.
    Warning: All data on the target drive will be erased.

    External SATA Hard Drive Duplicator

    Quick Start Guide AHDDUB100

    qsg Q10113 Copyright © 2009 Aluratek, Inc. All Rights Reserved.
    Thank you for choosing Aluratek’s® External SATA Hard Drive Duplicator. In addition to
    making sure only quality materials are used for manufacturing, Aluratek® is also
    dedicated to provide the best customer satisfaction and support.
    The goal of Aluratek is to embody "Simple Elegance" in every product it designs,
    manufactures and sells.
    The product focus of Aluratek is to bring simple yet elegant connectivity solutions to
    the consumers to enhance their consumer electronics, communications and computing
    experience. Each product is carefully designed with the consumer in mind. Each
    product is solution-driven to address the need of the consumers and deliberately
    planned to provide the ultimate user experience.
    Read this guide thoroughly and follow the installation and operation procedures
    carefully to prevent any damage to the unit and / or any of the devices it connects to.


    Duplicator Features:
    Create an exact duplicate copy of your sata hard drive
    • Full System Backup - backs up all your operating system files
    • One touch button backup - no need to connect to your computer
    • Led Indicator light with duplication status
    USB 2.0 Dual Docking Station Features:
    • Works as a fully functional USB 2.0 External HD
    • High speed data transfer rate of 480Mbps
    • Ultra cool product design increases your drives life expectancy
    • Transfer data between your computer and your SATA hard drive
    • Supports all 2.5" and 3.5" SATA Hard Drives
    • Plug-n-Play, Hot Swappable and Hot Pluggable
    • Limited 1 year warranty
    Windows 2000, XP & Vista OR MAC 10.3 or later
    Available USB 2.0 port

    Features and Requirements

    Your order has been carefully packaged and inspected. The following should be included in your package. Please
    inspect the contents of the package to ensure that you have received all items and that nothing has been damaged.
    If you discover a problem, please contact us immediately for assistance.
    Power Adapter

    Package Contents

    Radio and TV Interference Statement

    If you need further assistance, please contact the Aluratek support department
    for troubleshooting prior to returning this device.

    E-mail: [email protected]


    Local (Irvine, CA): 949-419-6504

    Toll free: 1-866-580-1978

    Technical Support

    WARNING!!! This equipment has been tested and found to comply with the limits of a
    Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
    provide reasonable protection against harmful interference in a residential installation.
    This equipment generates, uses and can radiate radio frequency energy and, if not
    installed and used in accordance with the instruction, may cause harmful interference to
    radio communications. However, there is no guarantee that interference will not occur in
    a particular installation. If this equipment does cause harmful interference to radio or
    television reception, which can be determined by turning the equipment off and on, the
    user is encouraged to try to correct the interference by whatever measures may be
    required to correct the interference.
    Aluratek warrants this product against defect in material or workmanship for 1 Year
    from the date of purchase.
    This warranty becomes invalid if the factory-supplied serial number or "warranty void"
    sticker has been removed or altered on the product.
    This warranty does not cover:
    A) Cosmetic damage or damage due to acts of God
    B) Accident, misuse, abuse, negligence or modification of any part of the product.
    C) Damage due to improper operation or maintenance, connection to improper equipment,
    or attempted repair by anyone other than Aluratek.
    D) Products sold AS IS or WITH FAULTS.
    Aluratek makes no warranty or representation, expressed, implied, or statutory, with
    respect to it's products, contents or use of this documentation and all accompanying
    software, and specifically disclaims it's quality, performance, merchantability, or fitness for
    any particular purpose. Aluratek reserves the right to revise or update it's product, software
    or documentation without obligation to notify any individual or entity.
    Use AHDDUB100 as a Duplicator:
    Step 1: Insert the hard drive that you want to copy (the one with data) into the slot
    labeled “Source”
    Step 2: Insert the blank hard drive into the slot labeled “Target”
    Step 3: Make sure the switch on AHDDUB100 is on “DUP”
    Step 4: Connect the power adapter to AHDDUB100
    Step 5: Press the “PWR” button to power on AHDDUB100
    Step 6: Press the “START” button to start the duplication process
    Step 7: The duplication process is completed when you see the status bar at 100%
    Step 8: Press the “PWR” button to power off AHDDUB100 & remove the hard drives

    Insert either a 2.5” or 3.5” hard drive
    into the dock slot
    Push the button to release the
    HDD from the dock
    Connect the USB cable to your
    computer to transfer data
    Quick Start Guide
    Warranty / Registration
    External SATA
    HDD Duplicator
    USB 2.0 Cable
    Use AHDDUB100 as a Hard Drive Docking Station:
    Step 1: Make sure the switch is on “JBOD”.
    Step 2: Connect the USB Type-B connector to AHDDUB100
    Step 3: Connect the USB Type-A connector to your computer
    Step 4: Insert 1 or 2 drives into the slots
    Step 5: Press the “PWR” button to power on AHDDUB100
    Step 6: For drives that are formatted, you will see the drives in “My Computer”.
    For non-formatted drives, you will need to go to “Disk Management” to
    format the drive before you can access the drive.
Aluratek AHDDUB100

Got a question?

Number of questions: 0

Do you have a question about the Aluratek AHDDUB100 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Aluratek AHDDUB100 owners to properly answer your question.

View the manual for the Aluratek AHDDUB100 here, for free. This user manual comes under the category Computer Accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Aluratek AHDDUB100? Ask your question here

Aluratek AHDDUB100 specifications

Brand Aluratek
Model AHDDUB100
Product Computer accessory
Language English
Filetype PDF
Other features
Interface docking connector
Compatible operating systems Windows 2000, XP, Vista, 7, Mac OS 10.3
Maximum data transfer rate 480 Mbit/s
Ports & interfaces
DC-in jack
USB 2.0 ports quantity 1
Product colour Black