AMX MVP-WDS-9-GW manual

AMX MVP-WDS-9-GW
(1)
  • Number of pages: 2
  • Filetype: PDF
  • Installation Guide

    MVP-WDS-9 Wall/Flush Docking Station

    Overview
    While charging the MVP-9000i, the Power-over-Ethernet MVP-WDS-9 Wall/Flush Mount Docking Station provides fast, reliable wired Ethernet communication to the touch panel. In addition, the MVP-WDS-9 employs a unique, anti-theft locking mechanism to keep the touch panel safe and secure. With a push of a button, the panel glides forward for simple removal and transport.
    The Wall/Flush Docking Station is available in either white (FG5967-13) or black
    (FG5967-12). The features of the MVP-WDS-9 include: • Touch panel password feature for security• Integrated docking alignment guides for easy docking
    Specifications
    The MVP-9000i panel remains locked in the MVP-WDS-9 until unlocked by the
    user. This may be done by pressing the Security Release button and then
    entering an appropriate password (please refer to the MVP-9000i Operation/
    Reference Guide, available from www.amx.com, for more information). The
    station ejects the MVP-9000i device top first (FIG. 2). The device uses two neodymium rare-earth magnets to secure the MVP-9000i to the cradle when the touch panel is angled forward.
    Unlocking the Touch Panel
    Once placed within the Wall Docking Station, the MVP-9000i remains secured until the user unlocks it. To release the touch panel from the Wall Docking Station:1. Press the Security Release button.2. A password keypad will pop up on the MVP-9000i screen. Enter a password in the password keypad and press Enter.3. Wait for the Wall Docking Station to pivot the touch panel away from the wall.4. The device will remain in the ejected position until the MVP-9000i is removed. Wait until the device’s ejection door has completely withdrawn before re-installing the MVP-9000i.
    Recharging
    To recharge the MVP-9000i:1. Slide the device into the Wall Docking Station cradle bottom-first and make sure the device is fully seated in the Docking Station. 2. Press the top of the MVP-9000i back until it clicks. The touch panel is now locked into the Docking Station, and the station will automatically charge the device’s battery.
    3. To release the touch panel, press the Security Release button, enter the
    password (if activated), and wait for the Wall Docking Station to pivot the touch panel away from the wall.
    FIG. 1 MVP-WDS-9-GB Wall Docking Station - Front
    MVP-WDS-9 Specifications
    Dimensions (HWD): 9.75" x 12.50" x 2.13" (24.77cm x 31.75cm x 5.40cm)
    Note: Always use the cutout/installation dimensions for the
    MVP-WDS-9 when installing this unit into various surfaces.
    A cutout template is included with the device for ease of
    installation.
    Power
    Requirements:
    30 W (Class II listed power supplemented), supplied via
    the PS-POE-AT High-Power PoE Injector.
    Startup Power
    Requirements:
    Cradle and panel (not charging): 16 W
    Cradle and panel (charging): 23 W
    Ejection: 23 W
    Weight: Without back box: 1.50 lbs (0.68 kg)
    With back box: 2.40 lbs (1.09 kg)
    Front Panel
    Components:
    Securing Magnets: Secures MVP touch panel during
    ejection.
    Security Latch: Adds the primary layer of security when
    mounting an MVP touch panel. When the device is
    inserted, this latch grabs onto the rear of the touch panel
    and secures it to prevent it from inadvertently being
    removed.
    Interface Connector: A set of contacts that connect to the
    underside MVP connector strip. This connection provides
    both communication and power between the touch panel
    and the MVP-WDS-9.
    Support Cradle: This retractable mechanism supports a
    resting MVP panel and allows a user to either insert or
    remove a connected MVP panel.
    Security Release pushbutton: Located on the front of the
    unit, this pushbutton toggles an on-screen security keypad
    if security is enabled.
    - Entering the correct release code allows the MVP-WDS-9
    to release the touch panel from the security latch.
    Operating/Storage
    Environments:
    Operating Temperature: 0° C (32° F) to 40° C (104° F)
    Battery Charging Temperature: 0° C (32° F) to 30° C
    (86° F)
    Operating & Battery Charging Humidity: 20% to 85% RH
    Storage Temperature: -10° C (-14° F) to 60° C (140° F)
    Storage Humidity: 5% - 85% RH
    Security Release
    MVP-9000i-GB
    MVP-WDS-9
    button
    MVP-WDS-9 Specifications (Cont.)
    Included
    Accessories
    Snap-On Ferrite (04-0007)
    MVP-WDS-9 Wall Docking Station Template (68-5967-01)
    PS-POE-AT High Power PoE Injector (FG423-81)
    Other AMX
    Equipment:
    MVP-9000i-GB, Black (FG5967-01)
    MVP-9000i-GW, White (FG5967-02)
    MVP-TDS-9-GB, Black (FG5967-10)
    MVP-TDS-9-GW, White (FG5967-11)
    CB-MVP-WDS9 Rough-In Box (FG038-13)
    FIG. 2
    MVP-WDS-9-GB Wall Docking Station - Side View
    MVP-9000i
    Wall Docking Station
    Security Release button
AMX MVP-WDS-9-GW

Got a question?

Number of questions: 0

Do you have a question about the AMX MVP-WDS-9-GW or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other AMX MVP-WDS-9-GW owners to properly answer your question.

View the manual for the AMX MVP-WDS-9-GW here, for free. This user manual comes under the category Computer Accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the AMX MVP-WDS-9-GW? Ask your question here

AMX MVP-WDS-9-GW specifications

General
Brand AMX
Model MVP-WDS-9-GW
Product Computer accessory
Language English
Filetype PDF
Ports & interfaces
Connectivity technology Docking
USB 2.0 ports quantity 0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 0
HDMI ports quantity 0
Microphone in
Headphone outputs 0
Network
Ethernet LAN (RJ-45) ports 0
Ethernet LAN
Performance
Product colour White
Compatibility Modero 9"
Card reader integrated
Power
Power consumption (typical) 23 W
Weight & dimensions
Weight 1090 g
Width 318 mm
Depth 54 mm
Height 248 mm
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -20 - 60 °C
Operating relative humidity (H-H) 20 - 85 %
Storage relative humidity (H-H) 5 - 85 %
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the AMX MVP-WDS-9-GW.

Is your question not listed? Ask your question here