Axis Q1659 24MM F/2.8 manual

Axis Q1659 24MM F/2.8
(1)
  • Number of pages: 2
  • Filetype: PDF
  • Thank you for purchasing a Canon product.
    EF-S24mm f/2.8 STM is a compact, lightweight, low-profile high quality wide-
    angle lens.
    “STM” stands for Stepping Motor.
    Safety Precautions
    Do not look at the sun or a bright light source through the lens or
    camera. Doing so could result in loss of vision.
    Looking at the sun directly through the lens is especially hazardous.
    Whether it is attached to the camera or not, do not leave the lens under
    the sun without the lens cap attached.
    This is to prevent the lens from
    concentrating the sun’s rays, which could cause a fire.
    Handling Cautions
    If the lens is taken from a cold environment into a warm one,
    condensation may develop on the lens surface and internal parts.
    To
    prevent condensation in this case, first put the lens into an airtight plastic
    bag before taking it from a cold to warm environment. Then take out the lens
    after it has warmed gradually. Do the same when taking the lens from a warm
    environment into a cold one.
    Do not leave the lens in excessive heat such as in a car in direct sunlight.
    High temperatures can cause the lens to malfunction.
    Usage Precautions
    When using this lens, please check the Canon website for the latest camera
    firmware. If the camera’s firmware is not the latest version, be sure to update
    to the latest firmware.
    For details on updating firmware, please check the Canon website.
    Cautions during shooting
    This lens uses a stepping motor to drive the focusing lens (the lens that has
    the job of focusing the shot).
    1. Cautions when the power is off
    Since the motor does not operate when the camera is off or has been
    turned by the auto power-off function, take note of the following points.
    •Thefocuscannotbeadjustedinmanualfocusmode.
    2. Cautions when the lens is in sleep mode
    This lens has a sleep mode separate from the camera auto power-off
    function for saving power when the lens has not been operated for a period
    of time.
    Since the motor does not operate when the lens is in sleep mode, even if
    the camera is turned on, take note of the following points.
    •Thefocuscannotbeadjustedinmanualfocusmode.
    •Torecoverthelensfromsleepmode,presstheshutterbuttonhalfway.
    To retract the lens if extended, keep the lens attached to the camera, and
    then autofocus at infinity or turn the focusing ring.
    Conventions used in this instruction
    Warning to prevent lens or camera malfunction or damage.
    Supplementary notes on using the lens and taking pictures.
    1. Mounting and Detaching the Lens
    See your camera’s instructions for details on mounting and detaching the
    lens.
    After detaching the lens, place the lens with the rear end up to prevent
    the lens surface and contacts from getting scratched.
    If the contacts get soiled, scratched, or have fingerprints on them,
    corrosion or faulty connections can result. The camera and lens may not
    operate properly.
    If the contacts get soiled or have fingerprints on them, clean them with a
    soft cloth.
    If you remove the lens, cover it with the dust cap. To attach it properly,
    align the lens mount index and the
    index of the dust cap, and turn
    clockwise
    . To remove it, reverse the order.
    2. Setting the Focus Mode
    To shoot in autofocus (AF) mode, set the focus mode switch to AF
    .
    To shoot in manual focus (MF) mode, set the focus mode switch to MF, and turn
    the focusing ring to set the focus
    .
    When the camera AF mode is ONE SHOT AF, focus manually by pressing
    the shutter button halfway and turning the focusing ring. (Full-time manual
    focus)
    When turning the focusing ring suddenly, the focus adjustment may be
    delayed.
    The focus cannot be adjusted in MF mode while the camera is off.
    Do not touch the front rotating parts of the lens while autofocus is active.
    Nomenclature
    Focus mode switch
    Focusing ring
    Lens mount index
    Contacts

    EF Lenses

    EF-S24mm f/2.8 STM

    Instructions

Axis Q1659 24MM F/2.8

Got a question?

Number of questions: 0

Do you have a question about the Axis Q1659 24MM F/2.8 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Axis Q1659 24MM F/2.8 owners to properly answer your question.

View the manual for the Axis Q1659 24MM F/2.8 here, for free. This user manual comes under the category Security cameras and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Axis Q1659 24MM F/2.8? Ask your question here

Axis Q1659 24MM F/2.8 specifications

General
Brand Axis
Model Q1659 24MM F/2.8
Product Security camera
EAN 7331021056350
Language English
Filetype PDF
Camera
Viewing angle, horizontal 50.583 °
Viewing angle, vertical 34.917 °
Viewing angle, diagonal 59.17 °
Field of view (FOV) angle 50.1 °
Minimum illumination 0.004 lx
Camera shutter speed 1/8000 - 1 s
Lens system
Maximum aperture number 2.8
Fixed focal length 24 mm
Closest focusing distance 0.16 m
Weight & dimensions
Weight 965 g
Width 102 mm
Height 75 mm
Length 199 mm
Performance
Type IP security camera
Placement supported -
PTZ control
PTZ modes Digital PTZ
Day/night mode
Infrared (IR) cut-off filter
Connectivity technology Wired
Number of languages 11
Languages support CHI (SIMPL),CHI (TR),DEU,ENG,ESP,FRE,ITA,JPN,KOR,POR,RUS
Certification CE, IEC/EN/UL 60950-1
Network
Wi-Fi -
Ethernet interface type Gigabit Ethernet
Networking standards IEEE 802.3af,IEEE 802.3at
Supported network protocols IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB - II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH
Quality of Service (QoS) support
Ethernet LAN
Ports & interfaces
Microphone in
Ethernet LAN (RJ-45) ports 1
Interface RJ-45
RS-422 ports 1
Headphone outputs 1
DC-in jack
Design
Form factor Box
Product colour Black
Mounting type -
Housing material Aluminium
Audio
Audio formats supported G.711,G.726
Audio detection
Audio system 2-way
Video
Maximum resolution 5472 x 3648 pixels
Video compression formats H.264,M-JPEG,MPEG4
Supported graphics resolutions 320 x 240
Supported video modes 240p,2160p
Frame rate 25 fps
Total megapixels 20 MP
Image quality adjustment Brightness,Colour depth,Sharpness
Privacy masking
Power
Power over Ethernet (PoE)
Power consumption (typical) 13.1 W
Power consumption (max) 25.5 W
Power source type PoE
Operational conditions
Operating temperature (T-T) 0 - 45 °C
Storage temperature (T-T) -40 - 65 °C
Operating relative humidity (H-H) 10 - 85 %
Packaging content
Number of cameras -
Security
Video motion detection
Active tampering alarm
IP address filtering
Security algorithms HTTPS,SSH,SSL/TLS
Password protection type User
HTTPS encryption
Alert notification type E-mail
Technical details
Lens mount interface Canon EF,Canon EF-S
Storage
Card reader integrated
Compatible memory cards MicroSD (TransFlash),MicroSDHC,MicroSDXC
Built-in HDD -
Flash memory 256 MB
Internal memory 1000 MB
Night vision
Night vision -

Frequently asked questions

Below, you will find the most frequently asked questions about the Axis Q1659 24MM F/2.8.

Is your question not listed? Ask your question here