Casio EFR-526BK-1A2V manual

Casio EFR-526BK-1A2V
(1)
  • Number of pages: 1
  • Filetype: PDF
  • 1

    Operation Guide 5345

    MA1212-EA
    Ú
    #!3)/#/-054%2#/,4$
    To change the day indicator setting
    To adjust the time setting
    Pull the Crown out to Click 1.
    Push the Crown back in.
    Push the Crown back in.
    Rotate the Crown to change the
    time setting.
    When the second hand is at
    12 o’clock, pull the
    Crown out to
    Click 2.
    Rotate the Crown to set the day.
    Note
    Take care that you set the correct AM
    x
    or PM time.
    When changing the time, move the
    x
    minute hand four or fi ve minutes past
    your fi nal setting, and then back it up
    to the setting you want.
    Note
    The day indicator setting uses a 31-
    x
    day month. Make adjustments for
    months of shorter lengths.
    Avoid changing the day indicator
    x
    setting between the hours of 9
    p.m. and 1 a.m. Otherwise, the day
    indicator may not change correctly at
    midnight.

    Specifi cations

    Accuracy: ±20 seconds average per month
    Stopwatch: Measuring Capacity: 59'59.9" (60 minutes)
    Measuring Unit: 1/10 second
    Measurements: Elapsed time; split time; two fi nishes
    Battery: One silver oxide battery (Type: SR920SW)
    Battery Life: Approximately 2 years (60 minutes stopwatch operation per day)
    Stopwatch functions
    Crown Operations
    Some water-resistant models (100 meters, 200 meters)
    have a screw-in crown. When you need to perform a crown
    operation, rotate it towards you to unscrew it. Then pull
    the crown out. Avoid applying undue force when pulling.
    The watch loses its water resistance while the crown is
    unscrewed. After performing a crown operation, fully screw
    the crown back in.
    Crown
    Loosen
    If your watch has a rotary bezel...
    You can rotate the bezel to align its
    mark with the
    minute hand. Then you will be able to tell how much
    time has elapsed since aligning the
    mark.
    Start
    Elapsed time
    Current
    Your watch may differ somewhat from the one shown in the illustration. x
    Some models may use a combination of hands and rotating disks to indicate x
    information. The word “hand” in this section is used to mean both analog hands
    and rotating disks.
    Using the Stopwatch
    Elapsed time
    A
    A
    A A
    B
    Start Stop Re-start Stop Reset
    Split time
    A
    B
    B A
    B
    Start Split Split release Stop Reset
    Two fi nishes
    A
    B
    A B
    B
    Start Split
    First runner
    nishes.
    Display time of fi rst
    runner.
    Stop
    Second runner
    nishes.
    Split release
    Display time of
    second runner.
    Reset
    Important!
    Do not operate the stopwatch with the crown pulled out.
    x
    Note
    An elapsed time operation will stop automatically at the end of 60 minutes.
    x
    The stopwatch measures elapsed time in 1/10-second increments up to 59 minutes,
    59.9 seconds.
    Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
    positions when you reset the stopwatch.
    Correcting the 0 Positions of the Hands
    Pull the Crown out to Click 2.
    Press A to move the
    Stopwatch 1/10-Second Hand
    clockwise.
    Holding down x A will move the hand at high speed.
    Press B to move the
    Stopwatch Second Hand
    clockwise.
    Holding down
    x B will move the hand at high speed.
    The
    x
    Stopwatch Minute Hand
    is synchronized with the
    Stopwatch Second Hand
    .
    After all of the hands are the way you want, push the Crown back in.
    Important!
    Timekeeping stops while the crown is pulled out. Correct the current time setting
    x
    after performing the above operation.
    
    Second Hand
    Day Indicator
    Click 2
    Click 1
    Hour Hand
    Minute Hand
    A
    B
    Crown
    Stopwatch Minute Hand
    Stopwatch 1/10-Second Hand
    Stopwatch Second Hand
Casio EFR-526BK-1A2V

Got a question?

Number of questions: 0

Do you have a question about the Casio EFR-526BK-1A2V or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio EFR-526BK-1A2V owners to properly answer your question.

View the manual for the Casio EFR-526BK-1A2V here, for free. This user manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio EFR-526BK-1A2V? Ask your question here

Casio EFR-526BK-1A2V specifications

General
Brand Casio
Model EFR-526BK-1A2V
Product Watch
Language English
Filetype PDF
Technical details
Mechanism type -
Chronograph
Chronometer -
Watch dial type Analog dial
Waterproof
Water resistant pressure 10 ATM
Water resistant depth 100 m
Shockproof
Number of watch hands 3
Stopwatch
Accuracy ±20 sec/month
Clock mode 12h/24h
Screw-in crown
Watch type Wrist watch
Calendar type Date
Calendar
Design
Watch case material Stainless steel
Band material Stainless steel
Housing colour Black,Blue
Band main colour Black
Watch glass type Mineral
Case shape Round
Watch dial main colour Black
Watch marker style Arabic numerals/Non numeral
Product design -
Watch marker colour White/Blue
Power
Battery type SR920SW
Battery life 2 year(s)
Number of batteries supported 1
Weight & dimensions
Width 43.8 mm
Depth 11.6 mm
Height 48.5 mm
Weight 149 g

Frequently asked questions

Below, you will find the most frequently asked questions about the Casio EFR-526BK-1A2V.

Is your question not listed? Ask your question here