Casio GA-100L-8A manual

Casio GA-100L-8A
(1)
  • Number of pages: 4
  • Filetype: PDF
  • Operation Guide 5081

    1
    MO0911-EA

    Getting Acquainted

    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    About This Manual
    Depending on the model of your watch, display text appears either as dark figures
    on a light background or light figures on a dark background. All sample displays in
    this manual are shown using dark figures on a light background.
    Button operations are indicated using the letters shown in the illustration.
    Each section of this manual provides you with the information you need to perform
    operations in each mode. Further details and technical information can be found in
    the “Reference” section.
    Alarm Mode
    Countdown Timer Mode
    World Time Mode
    Stopwatch Mode

    General Guide

    Press C to change from mode to mode.
    In any mode (except a setting mode), press B to illuminate the display.
    Timekeeping Mode
    Press C.

    Timekeeping

    You can adjust the Home Time city date and time in the Timekeeping Mode.
    Pressing D in the Timekeeping Mode will toggle lower left display between the
    screens shown below.
    D
    Home City Date Home City Time
    Date Seconds
    Day of the week
    Hour
    Minutes
    SecondsPM indicator
    Day of the week
    To set the time and date
    1. In the Timekeeping Mode, hold down A for about three
    seconds until the city code flashes on the lower right
    display. This is the setting mode.
    2. Use D and B to select the city code you want.
    Make sure you select your Home City code before
    changing any other setting.
    For full information on city codes, see the “City Code
    Table”.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Hour
    Minutes
    City code
    PM indicator
    Seconds
    3. Press C to change the flashing screen content in the sequence shown below to
    select the other setting.

    Seconds

    12/24-Hour

    Format

    Hour

    Minutes

    DST

    Month

    Year

    City Code

    Day

    Illumination

    Duration

    4. When the timekeeping setting you want to change is flashing, use D or B to
    change it as described below.
    Change the city code
    Toggle the DST setting between
    Daylight Saving Time (
    ) and
    Standard Time (
    ).
    Use D (east) and B
    (west).
    Press D.
    To do this: Do this:Screen:
    5. Press A to exit the setting mode.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    Toggle between 12-hour ( ) and
    24-hour ( ) timekeeping
    Reset the seconds to
    Change the hour and minutes
    Change the year, month, or day
    Toggle the display illumination
    duration between 1.5 seconds (
    )
    and three seconds (
    )
    Press D.
    Press D.
    Use D (+) and B (–).
    Press D.
    Daylight Saving Time (DST)
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To change the Daylight Saving Time (summer time) setting
    1. In the Timekeeping Mode, hold down A for about three
    seconds until the city code flashes on the lower right
    display. This is the setting mode.
    2. Press C. This will display the DST setting screen.
    3. Use D to toggle the DST setting on and off.

    DST off ( ) DST on ( )

    The default DST setting is OFF ( ).
    4. When the setting you want is selected, press A to exit
    the setting mode.
    The DST indicator appears to indicate that Daylight
    Saving Time is turned on.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    DST indicator
    12-hour and 24-hour timekeeping
    With the 12-hour format, the PM indicator appears above the hour digits for times in
    the range of noon to 11:59 p.m. and no indicator appears for times in the range of
    midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    the PM indicator.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.

    Stopwatch

    You can use the stopwatch to measure elapsed time, lap
    times and split times. If you specify a distance value, the
    stopwatch also will calculate and display speeds.
    The digital display range of the stopwatch is 99 hours,
    59 minutes, 59.999 seconds. The stopwatch continues
    to run until you stop it. If it reaches the above limit, it will
    restart the time measurement from zero.
    The stopwatch operation continues even if you exit the
    Stopwatch Mode. If you exit the Stopwatch Mode while a
    stopwatch operation is in progress, the segments in the
    upper right dial will appear and disappear sequentially
    as stopwatch seconds are counted. This is to let you
    know that a stopwatch operation is in progress.
    All of the operations in this section are performed in the
    Stopwatch Mode, which you enter by pressing C.
    Speed hand
    Important!
    Check to make sure that the speed hand is not moving before you perform any
    Stopwatch Mode button operation.
    Specifying a Distance Value
    You can use the procedure below to specify a distance value, if you want. If you
    specify a distance value, the watch will calculate and indicate speed for certain
    stopwatch operations.
    The distance value represents kilometers, miles, or any other distance unit you want.
    Specifying a distance value of 10.0, for example, can mean 10.0 kilometers or 10.0
    miles.
    No speed calculation is performed when 0.0 is specified as the current distance
    value.
    For lap time readings, you can specify either the lap distance (when all the laps are
    the same distance) or the total race distance.
    For split time readings, you can specify the total race distance only. Though the
    watch will indicate a speed each time you take a split reading, they will be based on
    the total race distance, and so they will not indicate actual intermediate split speeds.
Casio GA-100L-8A

Got a question?

Number of questions: 0

Do you have a question about the Casio GA-100L-8A or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio GA-100L-8A owners to properly answer your question.

View the manual for the Casio GA-100L-8A here, for free. This user manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio GA-100L-8A? Ask your question here

Casio GA-100L-8A specifications

General
Brand Casio
Model GA-100L-8A
Product Watch
Language English
Filetype PDF
Design
Housing colour Beige,Black
Band main colour Beige,Black
Watch case material Resin
Band material Resin
Watch glass type Mineral
Case shape Round
Watch dial main colour Black
Watch marker style Non numeral
Watch marker colour Silver
Product design -
Technical details
Mechanism type -
Chronograph
Chronometer -
Watch dial type Analog & LCD dial
Waterproof
Water resistant pressure 20 ATM
Water resistant depth 200 m
Shockproof
Number of watch hands 2
Stopwatch
World time function
Timer 24h
Alarm function
Calendar
LED backlight
Accuracy ±15 sec/month
Watch type Wrist watch
Clock mode 12h/24h
Countdown timer
Anti-magnetic
Calendar type Day
Power
Battery type CR1220
Battery life 2 year(s)
Number of batteries supported 1
Weight & dimensions
Width 51.2 mm
Depth 16.9 mm
Height 55 mm
Weight 72 g
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Casio GA-100L-8A.

Is your question not listed? Ask your question here