Casio LW200-1AV manual

Casio LW200-1AV
(5)
  • Number of pages: 2
  • Filetype: PDF
  • Operation Guide 2672

    1

    About This Manual

    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    Timekeeping Mode
    Alarm Mode Stopwatch Mode Dual Time Mode
    Press .

    General Guide

    Press B to change from mode to mode.
    In any mode, press L to illuminate the display.
    Day of week
    Seconds
    Hour : Minutes
    PM indicator
    Month – Day

    Timekeeping

    Use the Timekeeping Mode to set and view the current
    time and date.
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press B to move the flashing in the sequence shown
    below to select other settings.
    Seconds HourMinutesYearMonthDay of week Day
    3. When the setting you want to change is flashing, press C to change it as
    described below.
    To change this setting
    Seconds
    Hour, Minutes, Year, Month,
    Day, Day of week
    Perform this button operation
    Press C to reset to 00.
    Press C to increase the setting.
    Holding down C changes the setting at high speed.
    Pressing C while the seconds are in the range of 30 to 59 resets them to 00 and
    adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
    4. Press A to exit the setting screen.
    The year can be set in the range of 2000 to 2099.
    The watchs built-in full automatic calendar automatically makes allowances for
    different month lengths and leap years. Once you set the date, there should be no
    reason to change it except after you have the watchs battery replaced.
    To toggle between 12-hour and 24-hour timekeeping
    In the Timekeeping Mode, press C to toggle between 12-hour timekeeping and
    24-hour timekeeping.
    With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
    times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
    hour digits for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, (24 indicator), times are displayed in the range of 0:00 to
    23:59.
    The P and 24 indicators are not displayed with the Timekeeping Mode time in the
    Alarm Mode and Dual Time Mode.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.

    Alarm

    When the daily alarm is turned on, the alarm tone sounds
    when the alarm time is reached.
    You can also turn on an Hourly Time Signal that causes
    the watch to beep twice every hour on the hour.
    Alarm setting (and Hourly Time Signal setting) is
    available in the Alarm Mode, which you enter by
    pressing B.
    Alarm Operation
    The alarm tone sounds at the preset time for 10 seconds,
    regardless of the mode the watch is in.
    Alarm time
    (Hour : Minutes)
    Timekeeping Mode tim
    e
    (Hour : Minutes)
    Mode indicator
    Hourly time signal
    on indicator
    Alarm on indicator
    To set an alarm time
    1. In the Alarm Mode, hold down A until the hour setting
    starts to flash, which indicates the setting screen.
    This operation automatically turns on the alarm.
    2. Press B to move the flashing between the hour and
    minutes.
    3. While a setting is flashing, use C to increase it.
    Holding down C changes the setting at high speed.
    With the 12-hour format, set the time correctly as a.m.
    (no indicator) or p.m. (P indicator).
    4. Press A to exit the setting screen.
    To stop the alarm tone after it starts to sound
    Press any button.
    To turn the Daily Alarm and Hourly Time Signal on and off
    In the Alarm Mode, press C to cycle through the on and
    off settings as shown below.
    Alarm On Indicator/Hourly Time Signal On Indicator
    Daily alarm
    only
    Both offBoth on Hourly Time Signal only
    The alarm on (ALM) indicator flashes while the alarm is
    sounding.
    The alarm on (ALM) indicator and Hourly Time Signal
    on (SIG) indicator are displayed in all modes.
    To test the alarm
    In the Alarm Mode, hold down C to sound the alarm.

    Stopwatch

    The stopwatch lets you measure elapsed time, split times,
    and two finishes.
    The display range of the stopwatch is 23 hours,
    59 minutes, 59.99 seconds.
    The stopwatch continues to run, restarting from zero
    after it reaches its limit, until you stop it.
    The stopwatch measurement operation continues even
    if you exit the Stopwatch Mode.
    Exiting the Stopwatch Mode while a split time is frozen
    on the display clears the split time and returns to
    elapsed time measurement.
    All of the operations in this section are performed in the
    Stopwatch Mode, which you enter by pressing B.
    To measure times with the stopwatch
    Elapsed timeStart Stop Re-start Stop ClearStartSplit(SPL displayed)Split release Stop ClearStartSplit Stop Split release ClearSplit timeTwo Finishes
    First runner
    finishes.
    Display time of
    first runner.
    Second runner
    finishes.
    Display time of
    second runner.
    Minutes
    1/100 second
    Mode indicator
    Hours
    Seconds

    Dual Time

    The Dual Time Mode lets you keep track of time in a different time zone.
    In the Dual Time Mode, the seconds count is synchronized with the seconds count
    of the Timekeeping Mode.
    To set the Dual Time
    1. Press B to enter the Dual Time Mode.
    2. Hold down A until the hour setting starts to flash,
    which indicates the setting screen.
    3. Press B to move the flashing between the hour and
    minutes settings.
    4. Press C to increase the setting. Holding down C
    changes the setting at high speed.
    5. Press A to exit the setting screen.
    Timekeeping Mode time
    (Hour : Minutes)
    Mode indicator
    Seconds
    Hour : Minutes
    MA0307-EA
Casio LW200-1AV

Got a question?

Number of questions: 0

Do you have a question about the Casio LW200-1AV or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio LW200-1AV owners to properly answer your question.

View the manual for the Casio LW200-1AV here, for free. This user manual comes under the category Watches and has been rated by 5 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Casio LW200-1AV? Ask your question here

Casio LW200-1AV specifications

General
Brand Casio
Model LW200-1AV
Product Watch
Language English
Filetype PDF
Technical details
Mechanism type Electronic
Chronograph -
Chronometer -
Watch dial type LCD dial
Waterproof
Water resistant pressure 5 ATM
Water resistant depth 50 m
Shockproof -
Stopwatch
Alarm function
Calendar
LED backlight
Accuracy ±20 sec/month
Clock mode 12h/24h
Certification -
Watch type Wrist watch
Calendar type Day
Design
Watch case material Resin
Housing colour Black,Silver
Band material Resin
Band main colour Black
Watch glass type Resin
Case shape Round
Watch dial main colour -
Product design -
Gender Female
Power
Battery type CR1620
Battery life 10 year(s)
Number of batteries supported 1
Weight & dimensions
Width 34.9 mm
Depth 11.9 mm
Height 37.9 mm
Weight 20 g
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Casio LW200-1AV.

Is your question not listed? Ask your question here