Casio LW200-7AV manual

Casio LW200-7AV
(1)
  • Number of pages: 2
  • Filetype: PDF

Operation Guide 2672

1

About This Manual

Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Timekeeping Mode
Alarm Mode Stopwatch Mode Dual Time Mode
Press .

General Guide

Press B to change from mode to mode.
In any mode, press L to illuminate the display.
Day of week
Seconds
Hour : Minutes
PM indicator
Month – Day

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press B to move the flashing in the sequence shown
below to select other settings.
Seconds HourMinutesYearMonthDay of week Day
3. When the setting you want to change is flashing, press C to change it as
described below.
To change this setting
Seconds
Hour, Minutes, Year, Month,
Day, Day of week
Perform this button operation
Press C to reset to 00.
Press C to increase the setting.
Holding down C changes the setting at high speed.
Pressing C while the seconds are in the range of 30 to 59 resets them to 00 and
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
4. Press A to exit the setting screen.
The year can be set in the range of 2000 to 2099.
The watchs built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watchs battery replaced.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press C to toggle between 12-hour timekeeping and
24-hour timekeeping.
With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, (24 indicator), times are displayed in the range of 0:00 to
23:59.
The P and 24 indicators are not displayed with the Timekeeping Mode time in the
Alarm Mode and Dual Time Mode.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.

Alarm

When the daily alarm is turned on, the alarm tone sounds
when the alarm time is reached.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
Alarm setting (and Hourly Time Signal setting) is
available in the Alarm Mode, which you enter by
pressing B.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds,
regardless of the mode the watch is in.
Alarm time
(Hour : Minutes)
Timekeeping Mode tim
e
(Hour : Minutes)
Mode indicator
Hourly time signal
on indicator
Alarm on indicator
To set an alarm time
1. In the Alarm Mode, hold down A until the hour setting
starts to flash, which indicates the setting screen.
This operation automatically turns on the alarm.
2. Press B to move the flashing between the hour and
minutes.
3. While a setting is flashing, use C to increase it.
Holding down C changes the setting at high speed.
With the 12-hour format, set the time correctly as a.m.
(no indicator) or p.m. (P indicator).
4. Press A to exit the setting screen.
To stop the alarm tone after it starts to sound
Press any button.
To turn the Daily Alarm and Hourly Time Signal on and off
In the Alarm Mode, press C to cycle through the on and
off settings as shown below.
Alarm On Indicator/Hourly Time Signal On Indicator
Daily alarm
only
Both offBoth on Hourly Time Signal only
The alarm on (ALM) indicator flashes while the alarm is
sounding.
The alarm on (ALM) indicator and Hourly Time Signal
on (SIG) indicator are displayed in all modes.
To test the alarm
In the Alarm Mode, hold down C to sound the alarm.

Stopwatch

The stopwatch lets you measure elapsed time, split times,
and two finishes.
The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.
To measure times with the stopwatch
Elapsed timeStart Stop Re-start Stop ClearStartSplit(SPL displayed)Split release Stop ClearStartSplit Stop Split release ClearSplit timeTwo Finishes
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
Minutes
1/100 second
Mode indicator
Hours
Seconds

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.
In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
To set the Dual Time
1. Press B to enter the Dual Time Mode.
2. Hold down A until the hour setting starts to flash,
which indicates the setting screen.
3. Press B to move the flashing between the hour and
minutes settings.
4. Press C to increase the setting. Holding down C
changes the setting at high speed.
5. Press A to exit the setting screen.
Timekeeping Mode time
(Hour : Minutes)
Mode indicator
Seconds
Hour : Minutes
MA0307-EA
Casio LW200-7AV

Got a question?

Number of questions: 0

Do you have a question about the Casio LW200-7AV or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio LW200-7AV owners to properly answer your question.

View the manual for the Casio LW200-7AV here, for free. This user manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio LW200-7AV? Ask your question here

Casio LW200-7AV specifications

General
Brand Casio
Model LW200-7AV
Product Watch
Language English
Filetype PDF
Design
Housing colour Pink,Silver
Band main colour White
Watch case material Resin
Band material Resin
Watch glass type Resin
Case shape Round
Watch dial main colour -
Product design -
Gender Female
Technical details
Mechanism type Electronic
Chronograph -
Chronometer -
Watch dial type LCD dial
Waterproof
Water resistant pressure 5 ATM
Water resistant depth 50 m
Shockproof -
Stopwatch
Alarm function
Calendar
LED backlight
Accuracy ±20 sec/month
Clock mode 12h/24h
Certification -
Watch type Wrist watch
Calendar type Day
Power
Battery type CR1620
Battery life 10 year(s)
Number of batteries supported 1
Weight & dimensions
Width 34.9 mm
Depth 11.9 mm
Height 37.9 mm
Weight 20 g
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Casio LW200-7AV.

Is your question not listed? Ask your question here