Casio PRG-300-7 manual

Casio PRG-300-7
(1)
  • Number of pages: 14
  • Filetype: PDF

MO1503-EA

© 2015 CASIO COMPUTER CO., LTD.

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measured values are then shown on the display. Such features make this watch useful when hiking,
mountain climbing, or when engaging in other such outdoor activities.
Warning !
The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
E E-1

ENGLISH

Important!
Your watch’s Altimeter Mode calculates relative altitude based on changes in barometric pressure
measurement by its pressure sensor. For more information, see pages E-51 and E-65.
Immediately before embarking or otherwise taking altitude readings, be sure to specify a reference
altitude. If you don’t the readings produced by the watch probably will not be very accurate. For more
information, see “To specify a reference altitude value” (page E-56).
To ensure correct direction readings by this watch, be sure to perform bidirectional calibration before
using it. The watch may produce incorrect direction readings if you do not perform bidirectional
calibration. For more information, see “To perform bidirectional calibration” (page E-30).
E-2

About This Manual

Depending on the model of your watch, digital display text appears
either as dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
Button operations are indicated using the letters shown in the
illustration.
Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.
E-3

Things to check before using the watch

1. Check the battery power level.
Is “
H
” or “
M
” displayed for the battery power indicator (page E-11)?
Go to step 2.
Power is low. Charge the watch by placing it in a location
where it is exposed to light. For details, see “Charging the
Watch” (page E-9).
NO YES
YES
Does any one of the following conditions exist?
Battery power indicator shows “L” and “LOW” is flashing on the
display.
CHG” is flashing on the display.
The face is blank.
The watch is charged
sufficiently.
For details about
charging, see
“Charging the Watch”
(page E-9).
NEXT
Battery power
indicator
E-4
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City and summer time settings” (page E-20) to confi gure
your Home City and daylight saving time settings.
Important!
World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you confi gure these settings correctly.
3. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-22).
The watch is now ready for use.
E-5

Contents

About This Manual …………………………………………………………………………………………… E-2
Things to check before using the watch ………………………………………………………………… E-3
Charging the Watch …………………………………………………………………………………………… E-9
To recover from the sleep state …………………………………………………………………… E-14
Mode Reference Guide …………………………………………………………………………………… E-15
Timekeeping ………………………………………………………………………………………………… E-19
Confi guring Home City Settings ………………………………………………………………………… E-20
To confi gure Home City and summer time settings ……………………………………………… E-20
Confi guring Current Time and Date Settings ………………………………………………………… E-22
To change the current time and date settings …………………………………………………… E-22
Taking Direction Readings ……………………………………………………………………………… E-25
To take a direction reading ………………………………………………………………………… E-26
To perform bidirectional calibration ………………………………………………………………… E-30
To perform magnetic declination correction ……………………………………………………… E-31
To store a direction angle reading in Bearing Memory ………………………………………… E-32
To set a map and fi nd your current location ……………………………………………………… E-34
To fi nd the bearing to an objective ………………………………………………………………… E-35
To determine the direction angle to an objective on a map and head in that direction
(Bearing Memory)………………………………………………………………………………… E-36
E-6
Specifying Temperature, Barometric Pressure, and Altitude Display Units …………………… E-40
To specify temperature, barometric pressure, and altitude display units ……………………… E-40
Taking Barometric Pressure and Temperature Readings ………………………………………… E-42
To take barometric pressure and temperature readings ………………………………………… E-42
To enable or disable the barometric pressure change alert …………………………………… E-47
To calibrate the pressure sensor and the temperature sensor ………………………………… E-49
Using the Altimeter Mode ………………………………………………………………………………… E-51
To select the altitude screen format ……………………………………………………………… E-52
To select the altitude auto reading interval ……………………………………………………… E-53
To take altitude readings …………………………………………………………………………… E-55
To specify a reference altitude value ……………………………………………………………… E-56
To specify the altitude differential start point ……………………………………………………… E-57
To use the altitude differential value ……………………………………………………………… E-58
To save a reading manually ………………………………………………………………………… E-59
To start trek log value updating …………………………………………………………………… E-62
To stop trek log value updating …………………………………………………………………… E-62
Precautions Concerning Simultaneous Altitude and Temperature Readings ………………… E-67
Viewing Altitude Records ………………………………………………………………………………… E-68
To view altitude records …………………………………………………………………………… E-68
To delete all manually saved data ………………………………………………………………… E-73
To delete data in a specifi c memory area ………………………………………………………… E-73
E-7
Looking up Sunrise and Sunset Times ………………………………………………………………… E-75
To enter the Sunrise/Sunset Mode ………………………………………………………………… E-75
To view the sunrise/sunset time for a particular date …………………………………………… E-76
To look up the sunrise and sunset times for a specifi c location ………………………………… E-77
Using the Stopwatch ……………………………………………………………………………………… E-79
To enter the Stopwatch Mode ……………………………………………………………………… E-79
To perform an elapsed time operation …………………………………………………………… E-79
To pause at a split time ……………………………………………………………………………… E-79
To measure two fi nishes …………………………………………………………………………… E-80
Using the Countdown Timer ……………………………………………………………………………… E-81
To enter the Countdown Timer Mode ……………………………………………………………… E-81
To specify the countdown start time ……………………………………………………………… E-81
To perform a countdown timer operation ………………………………………………………… E-82
To stop the alarm …………………………………………………………………………………… E-82
Using the Alarm …………………………………………………………………………………………… E-83
To enter the Alarm Mode …………………………………………………………………………… E-83
To set an alarm time ………………………………………………………………………………… E-84
To turn an alarm and the Hourly Time Signal on and off………………………………………… E-85
To stop the alarm …………………………………………………………………………………… E-86

Operation Guide 3443

Casio PRG-300-7

Got a question?

Number of questions: 0

Do you have a question about the Casio PRG-300-7 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio PRG-300-7 owners to properly answer your question.

View the manual for the Casio PRG-300-7 here, for free. This user manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio PRG-300-7? Ask your question here

Casio PRG-300-7 specifications

General
Brand Casio
Model PRG-300-7
Product Watch
Language English
Filetype PDF
Technical details
Mechanism type Tough Solar
Chronograph -
Chronometer -
Watch dial type LCD dial
Waterproof
Water resistant pressure 10 ATM
Water resistant depth 100 m
Shockproof -
Stopwatch
World time function
Timer 24h
Alarm function
Calendar
LED backlight
Accuracy ±15 sec/month
Altimeter
Barometer
Thermometer
Clock mode 12h/24h
Electronic compass
Countdown timer
Certification -
Watch type Wrist watch
Calendar type Day
Design
Watch case material Resin
Housing colour White
Band material Resin
Band main colour White
Watch glass type Mineral
Case shape Round
Watch dial main colour Black
Product design Sport
Power
Battery level indicator
Weight & dimensions
Width 47 mm
Depth 12.6 mm
Height 56 mm
Weight 57 g
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Casio PRG-300-7.

Is your question not listed? Ask your question here