Chief HB010R manual

Chief HB010R
  • Number of pages: 1
  • Filetype: PDF
  • 8803-000005 06/04/07
    CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]


    FOR RUNCO VX-1000C, VX1000CI, VX-1000D,VX-2C,
    XV-4000CI, VX-4000D, VX-5000C, VX-5000CI, VX-5000D,
    The Chief HB010R video projector ceiling mount is designed to provide fast, simple and secure installation of the
    Runco VX-1000c, . Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image
    alignment. The HB010R mount also has positive registration lock so that the projector may be removed without
    losing projector mount registration.
    INJURY! All components must be securely fastened to each other and to the ceiling, AND
    the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
    cannot, the ceiling MUST be reinforced.
    Unpack and check contents:
    (1) Deluxe ceiling mount housing assembly. (6) #10 washers, flat
    (1) Runco mounting bracket (6) 10 - 32 x 3/8” Screws, PH, Phillips
    (4) 5/16” Flange Nuts (6) 10 - 32 x 2” Screws, PH, Phillips
    (6) Nylon Spacer .
    50” OD X .26”ID X 1.625 TL
    1. Turn your projector upside down.
    2. Place the (6) Nylon Spacers over the six threaded inserts in the bottom of the projector .
    3. Place the Runco mounting bracket on the six nylon spacers on the bottom of the projector so the hooks are
    facing the back and the six holes in the bracket line up the six threaded inserts in the bottom of the projector.
    4. Slide the (12) #10 washers, two on each (6) 10-32 x 2” Screw and install them into the six threaded inserts in
    the projector. Securely tighten all six mounting screws at this time.
    5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the
    ceiling. If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
    6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
    PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
    mechanical installations. A third assistant is recommended.
    6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
    plate. Be sure the Runco mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange nuts.
    For projector alignment see attached sheet.
Chief HB010R

Got a question?

Number of questions: 0

Do you have a question about the Chief HB010R or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB010R owners to properly answer your question.

View the manual for the Chief HB010R here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Chief HB010R? Ask your question here

Chief HB010R specifications

Brand Chief
Model HB010R
Product Projector accessory
Language English
Filetype PDF
Brand compatibility Runco
Product colour Black
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Chief HB010R.

Is your question not listed? Ask your question here