CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: ch[email protected]iefmfg.com
The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco
CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly.(3) M10 Washers, Flat
(1) Panasonic mounting bracket(3) M10 x 1.5 x 50mm, bolt
(4) 5/16” Flange Nuts(6) .5” x .257” x .625” nylon spacers
1.Turn your projector upside down.
2.Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the
fist ones so they are two spacers tall.
3.Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up
with the three threaded inserts in the bottom of the projector with the three holes in the bracket.
4.Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in
the projector.Securely tighten all three mounting bolts at this time.
4.Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5.Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
PRECAUTION:Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6.With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots.Tighten securely using the (4) 5/16” flange
For projector alignment see attached sheet.
Got a question?
Number of questions: 0
Do you have a question about the Chief HB32B or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB32B owners to properly answer your question.
About the Chief HB32B
View the manual for the Chief HB32B here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Chief HB32B? Ask your question here