Chief HB42E manual

Chief HB42E
(1)
  • Number of pages: 2
  • Filetype: PDF
  • INSTALLATION INSTRUCTIONS

    Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
    makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
    or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
    pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
    document.

    © 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378

    • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

    8803-000108 RevA
    1/09

    MODEL: HB-42E Custom Projector Bracket

    Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
    1-800-582-6480.

    PARTS

    Figure 1:

    INSTALLATION

    WARNING:

    IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
    to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
    1. Stack nylon spacers on top of each other and on top of projector under center hole. (See Figure 1)
    2. Lower custom HB bracket onto nylon spacers. Ensure that the two corner tabs are toward the back of the projector, and three tabs toward
    the front. (See Figure 1)
    3. Attach HB bracket to projector using one M8 x 45mm button head screw and flat washer through center hole and nylon spacers. (See
    Figure 1)
    4. Install seven M8 x 12mm button head screws and M8 flat washers through corner and end tabs on bracket. (See Figure 1)
    (1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
    (7) SCREW, Button Head, M8 x 12mm (2) NYLON SPACER, .680x.390x.625
    (1) SCREW, Button Head, M8 x 45mm (8) WASHER, Flat, M8
    (1) KEY, Hex, M5
    Corner tabs
    toward back
    of projector
    1
    3
    x 1
    x
    4
    x 7

Chief HB42E

Got a question?

Number of questions: 0

Do you have a question about the Chief HB42E or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB42E owners to properly answer your question.

View the manual for the Chief HB42E here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Chief HB42E? Ask your question here

Chief HB42E specifications

General
Brand Chief
Model HB42E
Product Projector accessory
Language English
Filetype PDF
Features
Product colour Black
Brand compatibility Any brand
Compatibility Panasonic, Christie, Sanyo, EIKI
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Chief HB42E.

Is your question not listed? Ask your question here