Chief HB44E manual

Chief HB44E
(1)
  • Number of pages: 2
  • Filetype: PDF
  • INSTALLATION INSTRUCTIONS

    Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
    makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
    or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
    pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
    document.
    Chief Manufacturing, a products division of Milestone AV Technologies
    8401 Eagle Creek Parkway, Savage, MN 55378
    • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
    8803-002022 Rev00
    ©2011 Milestone AV Technologies,
    a Duchossois Group Company
    01/11
    Continued. . .

    MODEL: HB-44E Custom Projector Bracket

    Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

    PARTS

    Figure 1

    INSTALLATION

    WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
    to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
    1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)
    2. Attach HB bracket to projector using four M10 x 35mm hex head screws through four M10 washers and four outer corner holes in the HB
    bracket. (See Figure 1)
    3. Continue attaching bracket to projector using two M8 x 25mm hex head screws through two M8 washers into two outer center holes in
    bracket. (See Figure 1)
    4. Finish attaching bracket to projector using two M8 x 70mm hex head screws through four nylon spacers (2 spacers per hex head screw)
    and two M8 washers into two center holes in bracket. (See Figure 1)
    (1) BRACKET, Custom HB (4) SCREW, Hex head cap screw, M10 x 35mm
    (4) NUT, Flange, Hex, 5/16-18 (2) SCREW, Hex head cap screw, M8 x 25mm
    (4) WASHER, Flat, M10 (2) SCREW, Hex head cap screw, M8 x 70mm
    (4) WASHER, Flat, M8 (4) SPACER, Nylon, .74 x .391 x 1.0"
    1
    4
    x 2
    3
    x 2
    2
    x 2
    2
    x 2
Chief HB44E

Got a question?

Number of questions: 0

Do you have a question about the Chief HB44E or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB44E owners to properly answer your question.

View the manual for the Chief HB44E here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Chief HB44E? Ask your question here

Chief HB44E specifications

General
Brand Chief
Model HB44E
Product Projector accessory
Language English
Filetype PDF
Features
Brand compatibility Any brand
Product colour Black