(1) HB Right Mounting Bracket (4) 5/16” Flange Nuts
(1) M5.Allen Wrench
1. Turn your projector upside down.
Locate the three threaded brass inserts on each side of the bottom of the projector.
Place the mounting brackets on the projector lining up the three mounting holes in the brackets with the three
threaded brass inserts in the bottom of the projector.
4. Using the six M8 – 12mm screws and flatwashers, screw them into the six threaded inserts in the bottom of the
projector using the allen wrench provided. Securely tighten all six mounting screws at this time.
Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If
not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical
installations. A third assistant is recommended.
With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be
sure the HB49E mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely
using the 5/16” flange nuts.
For projector alignment see attached sheet.
Got a question?
Number of questions: 0
Do you have a question about the Chief HB49E or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB49E owners to properly answer your question.
About the Chief HB49E
View the manual for the Chief HB49E here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Chief HB49E? Ask your question here