CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: c[email protected]chiefmfg.com
VIDEO PROJECTOR CEILING MOUNT
FOR DIGITAL PROJECTION TITAN SERIES,
The Chief HB72P video projector ceiling mount is designed to provide fast, simple and secure installation of the
Panasonic PT-D10000U, PT-D10000E, PT-DW10000U and PT-DW10000E. Special roll, pitch, yaw and horizontal
adjustments simplify projection positioning for image alignment. The HB71P mount also has positive registration lock
so that the projector may be removed without losing projector mount registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling,AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly.(5) M6 Washers, Flat
(1) Panasonic mounting bracket(5) M6 x 1.0 x 25mm, Phillips Pan Head Screw
(4) 5/16” Flange Nuts
1.Turn your projector upside down.
2.Place the Panasonic mounting bracket over the bottom of your projector lining up with the five threaded inserts
in the bottom of the projector with the five holes in the bracket.
3.Slide the (5) M6 washers, one on each (5) M6 x 25mm screws and install them into the five threaded inserts in
the projector.Securely tighten all five mounting screws at this time.
4.Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5.Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
PRECAUTION:Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6.With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots.Tighten securely using the (4) 5/16” flange
For projector alignment see attached sheet.
Got a question?
Number of questions: 0
Do you have a question about the Chief HB72P or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB72P owners to properly answer your question.
About the Chief HB72P
View the manual for the Chief HB72P here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Chief HB72P? Ask your question here