Chief HB92C manual

Chief HB92C
(1)
  • Number of pages: 1
  • Filetype: PDF

HB92C

VIDEO PROJECTOR CEILING MOUNT
FOR CHRISTIE DIGITAL EASY RIDER,
The Christie HB92C custom video projector ceiling mount is designed to provide fast, simple and secure installation.
Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The HB92C
mount also has positive registration lock so the projector may be removed without losing projector mount
registration.
Unpack and check contents:
(1) Deluxe ceiling mount assembly (8) M12 Flat washers
(1) Custom mounting bracket (8) M12 X 20mm hex bolts
(4) 5/16” flange nuts
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the custom mounting bracket on the projector so the small triangle in the bracket is toward the front of the
projector and all eight holes in the custom bracket align with the eight mounting inserts in the bottom of your
projector.
3. Place (1) M12 flat washer on each of the (8) M12 X 20mm bolts, starting them all by hand and secure them using
the proper size wrench. Using the proper wrench, securely tighten all eight mounting bolts at this time.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
4. Be sure the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If not,
the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
WARNING: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended
6. With the help of your one or two assistants, lift the projector and install it on the studs extending from the
mounting plate. Make sure the custom mounting plate is seated in the slots and Tighten securely using the
four 5/16” flange nuts.
For projector alignment see attached sheet.

8803-000063 02/05

Chief HB92C

Got a question?

Number of questions: 0

Do you have a question about the Chief HB92C or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief HB92C owners to properly answer your question.

View the manual for the Chief HB92C here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Chief HB92C? Ask your question here

Chief HB92C specifications

General
Brand Chief
Model HB92C
Product Projector accessory
Language English
Filetype PDF
Features
Brand compatibility -
Compatibility Christie
Product colour Black
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Chief HB92C.

Is your question not listed? Ask your question here