Chief SSB245 manual

Chief SSB245
(1)
  • Number of pages: 1
  • Filetype: PDF
  • 8802-002012 Rev01
    ©2009 Milestone AV Technologies,
    a Duchossois Group Company
    www.chiefmfg.com
    09/09

    INSTALLATION INSTRUCTIONS

    Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
    no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
    of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
    implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
    Chief Manufacturing, a products division of Milestone AV Technologies
    8401 Eagle Creek Parkway, Savage, MN 55378
    • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

    SSB-245, SSM-245, SLB-245 and SLM-245 Interface Brackets

    SSB-245, SSM-245, SLB-245 and SLM-245 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
    installation instructions provided with the mount for additional installation information.
    Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
    WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

    Installation Instructions

    WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
    NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
    1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
    2. Turn projector upside down on a flat surface.
    3. Place the interface bracket onto the bottom of the projector, and align the three mounting holes in the bracket with the three threaded
    inserts in the bottom of the projector.
    4. Position the M4 x 8mm mounting screws and M4 flat washers through the bracket and into the threaded inserts. Tighten all fasteners at
    this time, securing the bracket to the projector.
    NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the
    All-Points Security Kit.
    Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
    (1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M4 x 8mm
    (4) 10-24 Thumb Nuts ** (3) Washer, Flat, M4
    (1) All-Points Security Kit (1) 5/32" Security Hex Key
    **Only used when installing SLB/SSB interface brackets.
    NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.
    DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.
    Towards
    front of
    projector
    Towards
    front of
    projector
Chief SSB245

Got a question?

Number of questions: 0

Do you have a question about the Chief SSB245 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief SSB245 owners to properly answer your question.

View the manual for the Chief SSB245 here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Chief SSB245? Ask your question here

Chief SSB245 specifications

General
Brand Chief
Model SSB245
Product Projector accessory
Language English
Filetype PDF
Features
Brand compatibility Mitsubishi
Product colour Black
Compatibility FD, HC, UD, WD, XD series