SSB-176, SSM-176, SLB-176 and SLM-176 Interface Brackets
SSB-176, SSM-176, SLB-176 and SLM-176 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING:IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
WARNING:OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.
NOTE:Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1.Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2.Turn projector upside down on a flat surface.
3.Place interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts in the bottom of the
4.Using the M6 x 12mm mounting screws and M6 flat washers, position mounting screws and washers into the mounting holes. Tighten all
fasteners at this time, securing the bracket to the projector.
NOTE:Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the
All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket(4) Washers, Flat, M6
(6) 10-24 Thumb Nuts **(4) Screw, Phillips Pan Head, Machine, M6 x 12mm
(1) All-Points Security Kit
**Only used when installing SLB/SSB interface brackets.
NOTE:Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the
encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style
interface bracket installation.
Towards front of
Towards front of
Got a question?
Number of questions: 0
Do you have a question about the Chief SSM176 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief SSM176 owners to properly answer your question.
About the Chief SSM176
View the manual for the Chief SSM176 here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Chief SSM176? Ask your question here