Chief SSM2131 manual

Chief SSM2131
(1)
  • Number of pages: 1
  • Filetype: PDF

INSTALLATION INSTRUCTIONS

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8850-000144 Rev01
©2009 Milestone AV Technologies,
a Duchossois Group Company
05/09

SSB-2131, SSM-2131, SLB-2131 and SLM-2131 Interface Brackets

SSB-2131, SSM-2131, SLB-2131 and SLM-2131 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the
specific installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.
NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down.
3. Place 1/4" nylon spacers over the threaded inserts in bottom of projector.
4. Place interface bracket onto bottom of projector and align mounting holes in bracket with the threaded inserts in projector.
5. Position interface bracket to projector using M5 x 16mm Phillips pan head screws and flat washers. Tighten all fasteners at this time,
securing the bracket to the projector.
NOTE: Security Screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the
All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M5 x 16mm ****
(4) 10 - 24 Thumb Nuts** (3) Washer, Flat, M5
(1) All-Points Security Kit (3) 1/2" x .218" x 1/4" Round Spacer ****
**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.
NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the
encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style
interface bracket installation.
SLB-2131
SLM-2131
Towards front of
projector
Towards front of
projector
(
Not
e: SS
B-sty
le inte
rface
brack
et co
nnect
ions
a
r
e
e
n
c
i
r
c
l
e
d
)
(No
te: S
SM-s
tyle in
terfac
e bra
cket c
onne
ction
s
are
encir
cled)
Chief SSM2131

Got a question?

Number of questions: 0

Do you have a question about the Chief SSM2131 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chief SSM2131 owners to properly answer your question.

View the manual for the Chief SSM2131 here, for free. This user manual comes under the category Projector accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Chief SSM2131? Ask your question here

Chief SSM2131 specifications

General
Brand Chief
Model SSM2131
Product Projector accessory
Language English
Filetype PDF
Features
Brand compatibility Sony
Compatibility VPL serie
Product colour Black
show more

Frequently asked questions

Below, you will find the most frequently asked questions about the Chief SSM2131.

Is your question not listed? Ask your question here