Garmin GSC10

Garmin GSC10 manual

(3)
  • Adjust and Test
    1. Unscrew and move the sensor arm to within 5 mm of the
    spoke magnet. You can also tilt the GSC10 closer to either
    magnet for improved alignment.
    2. Press the Reset button on the GSC10. The LED light turns
    red, then green. Pedal to test the sensor alignment. The red
    LED blinks each time the crank arm passes the sensor, and
    the green LED blinks each time the wheel magnet passes
    the sensor arm.
    Note: The LED blinks for the first 60 passes after a reset.
    Press Reset again if you require additional passes.
    3. When everything is aligned and working correctly, tighten
    the cable ties, sensor arm, and spoke magnet.
    Install the GSC10 Sensor
    Place the GSC10 on the rear chain stay (the side opposite
    of the drive train). Loosely attach the GSC10 using two
    cable ties.
    reset button
    cable ties
    indication
    line
    GSC10 on rear chain stay
    For more information on using the GSC10 with your compatible
    GPS device, refer to your owner’s manual.
    Install the Pedal Magnet
    Attach the pedal magnet to the crank arm using the
    adhesive mount and a cable tie. Make sure the pedal
    magnet is within 5 mm of the GSC10, and the indication line
    on the pedal magnet is aligned with the indication line on the
    GSC10.
    cable tie
    indication
    line
    Pedal magnet on crank arm
    Install the Spoke Magnet
    Attach the spoke magnet by unscrewing the magnet from
    the plastic piece. Then place the spoke in the groove of the
    plastic piece and tighten slightly. The magnet can face away
    from GSC10 if there is not enough room between the sensor
    arm and spoke. Make sure the magnet is aligned with the
    sensor arm indication line.
    pedal magnet
    sensor arm
    indication line
    spoke magnet
    GSC10
Garmin GSC10

Got a question?

Number of questions: 0

Do you have a question about the Garmin GSC10 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Garmin GSC10 owners to properly answer your question.

View the manual for the Garmin GSC10 here, for free. This user manual comes under the category Heart Rate Monitor and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Garmin GSC10? Ask your question here

Garmin GSC10 specifications

General
Brand Garmin
Model GSC10
Product Heart Rate Monitor
EAN 753759050030
Language English
Filetype PDF
Features
Compatibility Colorado 300\r\nColorado 400c\r\nColorado 400i\r\nColorado 400t\r\nEdge 305\r\nEdge 705\r\nForerunner 305\r\nForerunner 405\r\nForerunner 50\r\nOregon 300\r\nOregon 400c\r\nOregon 400i\r\nOregon 400t
Product colour Black

Frequently asked questions

Below, you will find the most frequently asked questions about the Garmin GSC10.

Is your question not listed? Ask your question here